摆线针轮减速机箱体破裂的原因

Cause of the breakdown of the machine case body of the pin gear reducer

标签:摆线针轮减速机，摆线减速机，减速机   时间: 2016-8-10   点击: 147 次

Tags: pin reducer, reducer, speed reducer time: 2016-8-10 Click: 147 times

摆线针轮减速机箱体破裂的原因：

Cause of the breakdown of the machine case body of the pin gear reducer:

1.选型不适合、超负荷运转：

1 type selection is not suitable, overload operation:

如果摆线针轮减速机选型过小，造成减速机超负荷运转，可能导致机壳不堪重负而破裂。

If the selection of the reducer is too small, which leads to the overload of the speed reducer, it may lead to the breakdown of the casing.

2.摆线针轮减速机内部有异物：

2 there is a foreign body in the inner of the speed reducer:

摆线针轮减速机工作过程中零件脱落或者外来异物卡在机器内可能会导致机壳破裂。

In the process of working, the part falls off or the foreign body stuck in the machine can cause the machine to break.

3.冲击力过大：

3 impact force is too large:

有些摆线针轮减速机的配套机械运动的瞬间冲力过大，超过了摆线针轮减速机外壳的承受范围。

Supporting the mechanical movement of some cycloid reducer of excessive momentum, more than cycloidal reducer shell bearing.