住友减速机,弗兰德减速机,SEW减速机,南高齿-赛蔚传动设备 设为首页 - 加入收藏 - 技术博客 - 网站地图
   齿轮马达
RR系列同轴式斜齿减速机
RS系列斜齿轮-蜗轮减速机
RK系列斜齿-螺旋锥齿轮减速机
RF系列平行轴斜齿减速机
   行星减速机
RP系列行星减速机
   重载齿轮箱
RHB工业齿轮箱
RM系列大型工业减速器
   高速齿轮箱/增速箱
R高速齿轮箱/增速箱
   风电齿轮箱
R风电齿轮箱
   三相异步电动机
R三相异步电动机
您当前位置: 首页 > 新闻资讯
正确存储摆线针减速机小妙招

怎么样才可以正确存储摆线针减速机。存储摆线针减速机是一个非常重要的环节。独立冷却系统由空气与润滑油热交换器、电动泵、滤清器和一套电气系统组成,电气系统含有保护电动机的温度传感器,冷却装置运行中非常安静。

How can we correctly store cycloid reducer. Storage cycloid reducer is a very important link. The independent cooling system is composed of air and lubricating oil heat exchanger, electric pump, filter and a set of electrical system.

对于各种产品要确保产品的存储:

For all products to ensure product storage:

一、对于存放时间超过60天的减速机,所有加工面如法兰、轴和联轴器必须要涂上一防锈产品

First, for the storage time of more than 60 days of the reducer, all processing surfaces such as flanges, shafts and couplings must be coated with a rust proof product

二、不要储存在户外露天或过于潮湿的地方。

Two, do not store in the open air or too humid place.

三、始终在设备和地板之间垫有木板、木材或其它材料。减速机不得与地板直接接触。

Three. Always keep boards, wood or other material between the equipment and the floor. No direct contact with floor.

放置减速机时必须使通气塞处于顶部并注满润滑油不适用于终身润滑减速机。在摆线针减速机投入运转之前,重新注入适当数量和型号的润滑油润滑部分有说明。在减速机中注入适量的润滑油,润滑油的粘性根据以下列表选择。减速机通常装备有注油孔和放油塞。因而在订购减速机的时候必须指定安装位置。

The reducer must be placed at the top and the ventilation plug filled with lubricating oil is not suitable for permanently lubricated gear reducer. Before the reducer is put into operation, the proper amount and type of lubricating oil is re injected. Squeeze the right amount of lubricating oil in the reducer, and the viscosity of the lubricant is selected according to the following list. Reducer are usually equipped with oil hole and oil drain plug. Therefore, the installation position must be specified when ordering the reducer.


日期:2017/1/24 14:28:36
咨询QQ
点击这里给我发消息